|Availability:||Out of stock|
CowCow PinkMood Enhanced Loading Nozzle for TM Hi Capa / 1911
- Injection-molded polymer construction
- Designed and recommended for advanced players
- High impact resistance
- Superb performance, air seal and durability
- The vale pin lock is more durable and stable than the traditional design
- Increase nozzle diameter to 14mm which effectively improves the performance.
- Use a new generation non-rotating valve
- Including nozzle & valve pin lock.
- Not compatible with stock TM nozzle valve and valve block
- For TM Hi-Capa & 1911
On some occasions, your pistol will fail to feed BBs from the magazine due to low gas pressure. To solve, this, you can remove a spacer to solve the issue. If this does not solve the problem, consult with an airsoft gunsmith.
Velocity increases can be achieved installation of this part. However, this typically occurs when installed in conjunction with other parts and advanced knowledge of gas blowback guns is needed. improper installation of the loading nozzle can shorten the useful life of the product.
Please note: installing this item will require intermediate knowledge of gas blowback pistols. Expert or airsoft gunsmith installation is highly recommended. Please refer to your airsoft gunsmith for proper installation. Fitting may be required depending on the make/brand of gun and parts you are using. Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear on parts. All screws require low strength thread lock glue to properly set, otherwise loosening of parts make occur over time.