ASG Dan Wesson 2.5" 4.5mm (.177 Cal) CO2 Full-Metal Steel BB Revolver - Silver
$129.99
ASG Dan Wesson 2.5" 4.5mm CO2 Revolver - Silver
There's something unmistakable about a classic snub-nose revolver, and the ASG Dan Wesson 2.5" 4.5mm CO2 Airgun brings that distinctive design to recreational target shooting. Officially licensed by Dan Wesson, this compact .177 caliber revolver features a silver/chrome-finished metal body, ergonomic black grip, and six individually loaded cartridges that give it the familiar loading experience of a traditional revolver.
Rather than feeding from a conventional magazine, each reusable cartridge holds one 4.5mm steel BB and loads directly into the rotating cylinder. The included speedloader makes reloading more convenient, while the adjustable rear sight and attachable accessory rail add useful functionality to this compact CO2-powered airgun.
Important: This is a 4.5mm (.177 caliber) steel BB airgun, NOT a 6mm airsoft revolver. It is not intended for airsoft gameplay or standard 6mm plastic airsoft BBs.
Features
- Officially Licensed Dan Wesson Replica: Features authentic Dan Wesson markings and an individual serial number stamped into the frame.
- Compact 2.5-Inch Barrel: Classic snub-nose revolver styling in a compact configuration.
- Full-Metal Construction: Metal barrel, frame, and cylinder with a silver/chrome finish provide a substantial feel.
- Six-Shot Rotating Cylinder: Holds six individual cartridges, each loaded with one 4.5mm steel BB.
- Realistic Cartridge Loading: Reusable metal shells replicate the loading and unloading process of a traditional revolver.
- Included Speedloader: Helps load the six cartridges into the cylinder more conveniently.
- Double-Action Trigger: Allows the revolver to be fired by pulling the trigger or by manually cocking the hammer before firing.
- Adjustable Rear Sight: Allows sight adjustment to suit the shooter's target setup.
- Ergonomic ABS Grip: Textured black grip provides a comfortable hold and conceals the CO2 cartridge compartment.
- Easy-Access CO2 Compartment: Sliding the grip panel back provides access to the internal 12g CO2 cartridge.
- Included Accessory Rail: Attachable tactical rail provides an additional mounting option for compatible accessories.
Key Specifications & Details
| Manufacturer | ActionSportGames (ASG) |
|---|---|
| Licensed Brand | Dan Wesson |
| Model | Dan Wesson 2.5" Revolver (DW Gen I Series) |
| Manufacturer SKU | 17177 |
| EAN | 5707843047371 |
| Product Type | CO2-Powered Steel BB Air Revolver |
| Caliber | 4.5mm / .177 Caliber |
| Ammunition | 4.5mm Steel BBs |
| Power Source | 12g CO2 Cartridge |
| Action | Non-Blowback Revolver |
| Trigger | Single / Double Action |
| Construction | Metal Body with ABS Grip |
| Finish | Silver / Chrome |
| Barrel Length | 2.5 inches (Nominal) |
| Overall Length | 210mm / 8.27 inches |
| Weight | 870g / 1.92 lbs |
| Capacity | 6 Rounds |
| Ammunition Loading | 6 Individual Reusable Cartridges |
| Manufacturer Rated Velocity | Approximately 328 FPS / 100 m/s |
| Manufacturer Rated Energy | 1.75 Joules |
| Rear Sight | Adjustable |
| Accessory Mount | Included Attachable Tactical Rail |
| Compatible Speedloader | ASG 16187 |
| Compatible Cartridge Set | ASG 18756 (DW Gen I / 715) |
Compatibility & Setup
The ASG Dan Wesson 2.5" Revolver uses 4.5mm (.177 caliber) steel BB ammunition and a standard 12g CO2 cartridge. The CO2 cartridge is housed inside the grip, while the ammunition is loaded into six individual reusable cartridges that fit into the revolver's rotating cylinder.
Loading the Revolver: Insert one compatible 4.5mm steel BB into each cartridge according to the manufacturer's instructions. Load the cartridges into the cylinder individually or use the included six-round speedloader. Close the cylinder securely before firing.
CO2 Installation: Slide the grip panel back to access the CO2 compartment. Install a compatible 12g CO2 cartridge following the manufacturer's instructions. CO2 cartridges are separate consumables and are not included.
Replacement Cartridges: ASG identifies cartridge set 18756 for its Dan Wesson Gen I and 715 revolvers. Confirm the correct 4.5mm cartridge configuration when purchasing replacements, since 6mm airsoft shells and other Dan Wesson variants may differ.
Not Airsoft Compatible: This revolver is designed for 4.5mm steel BBs, not 6mm plastic airsoft ammunition. Use appropriate eye protection and a target and backstop rated for steel BB airguns. Steel BBs can ricochet from unsuitable surfaces.
Actual velocity and energy may vary with CO2 pressure, temperature, ammunition, and operating conditions. Published performance figures are manufacturer ratings rather than guaranteed results.
Package Includes
- 1x ASG Dan Wesson 2.5" 4.5mm CO2 Revolver - Silver
- 6x Reusable 4.5mm Steel BB Cartridges
- 1x Six-Round Speedloader
- 1x Attachable Tactical Accessory Rail
Additional items needed: Compatible 4.5mm steel BBs, 12g CO2 cartridges, appropriate eye protection, and a suitable steel-BB-rated target and backstop. These items are sold separately unless otherwise specified.
Buyer Questions
Is this a 4.5mm airgun or a 6mm airsoft revolver?
This is the 4.5mm (.177 caliber) steel BB airgun version. It does not use standard 6mm plastic airsoft BBs and should not be used in airsoft matches.
How does the six-shot cartridge system work?
Each reusable cartridge holds one 4.5mm steel BB. The six cartridges load into the rotating cylinder, and the included speedloader makes inserting a full set more convenient.
Does the Dan Wesson 2.5" revolver have blowback?
No. This is a non-blowback CO2 revolver. The cylinder rotates as the action operates, but it does not use a cycling slide or gas blowback mechanism.
What CO2 cartridges does it use?
The revolver uses compatible standard 12g CO2 cartridges installed inside the grip. CO2 cartridges are not included with the revolver.
Can I purchase additional shells and accessories?
Yes. ASG offers compatible replacement cartridge sets and speedloaders for the Dan Wesson revolver family. Be sure to select 4.5mm steel BB cartridges intended for the appropriate Dan Wesson generation rather than 6mm airsoft shells.
Related AEX Products & Resources
Explore Airsoft Extreme's selection of airguns, CO2 supplies, and target-shooting accessories. Choose ammunition and replacement cartridges specifically compatible with 4.5mm Dan Wesson airgun revolvers.






















